1965 – 1970 Mustang

Modern Power Steering Conversion

999020_mustang_conversion_kitBorgeson offers an integral power steering conversion for your 1965-1970 Classic Mustang. The Borgeson conversion box is a re-manufactured modern integral power steering gearbox. The Borgeson integral power steering gearbox provides true modern power steering feel, feedback and a sporty 16:1 ratio. Borgeson has re-manufactured this box to bolt directly to the factory mounting location and to fit the stock Pitman arm. The factory column will need to be collapsed or shortened 1-2” for clearance of the conversion box.

Factory power steering cars will require either manual drag link #990050 or drag link adapter #990003

NOTE: Power conversion box will not fit with factory Z-bar clutch linkage.

Steering Column Modifications

  • 1965-1967 – Cars you will need to trim the outer column tube for clearance of the rag joint and use replacement inner column shaft #990040. The conversion box will then connect to the stock column with rag joint #052534.
  • 1968-1970 – Cars have a factory collapsible steering column. Gently tap on the rag joint flange with a rubber mallet to collapse the shaft in on itself for the needed clearance. The conversion box will then connect to the shaft with half rag joint #990016.

Mustang Manual Steering Boxes

Borgeson quality re-manufactured Mustang steering boxes are available in six different configurations. Borgeson is sure to have the direct replacement manual box for your classic Mustang.

ford mustang